Product Code: [Insert Product Code]
Brand: GenLabs
Volume: 30mL Sterile Glass Vial
Preservative: 0.9% Benzyl Alcohol
pH: Balanced to 5.7 (approximately)
Sterility: Sterile Filtered (0.22 micron)
Certifications: cGMP Compliant Manufacturing
Packaging: Sealed, Tamper-Evident Vial with Color-Coded Flip-Off Cap
In the precise worlds of peptide research, hormone therapy, veterinary medicine, and advanced compounding, the integrity of your active compounds is paramount. However, even the most potent and pure substance is only as reliable as the diluent used to prepare it. Introducing GenLabs Bacteriostatic Water 30mL—the purpose-engineered, sterile solution designed for safe, multi-dose reconstitution and dilution of injectable medications and research peptides.
Bacteriostatic Water is not merely "sterile water." It is a sophisticated pharmaceutical vehicle, meticulously formulated with 0.9% Benzyl Alcohol. This critical additive inhibits microbial growth, allowing a single vial to be used safely for multiple doses over a defined period (typically 28 days), reducing waste and enhancing convenience without compromising sterility. GenLabs manufactures this essential tool under strict cGMP (Current Good Manufacturing Practice) conditions, ensuring every 30mL vial meets uncompromising standards of purity, clarity, and performance. For professionals and informed users who demand precision, this product is the foundational cornerstone of safe and effective solution preparation.
1. Pharmaceutical-Grade Sterility and Purity:
The cornerstone of the GenLabs formula is its guaranteed sterility. Each batch is filtered through a 0.22-micron microbiological filter, the industry standard for removing bacteria and potential endotoxins. The water itself is of the highest USP-grade purity, free from pyrogens and particulate contaminants. This ensures that the introduction of the diluent does not introduce any adulterants that could skew research results, cause adverse reactions, or degrade the stability of your reconstituted product.
2. 0.9% Benzyl Alcohol as a Bacteriostatic Agent:
The defining component of bacteriostatic water is the inclusion of Benzyl Alcohol at a concentration of 0.9%. This agent is not an antibacterial in the therapeutic sense but a highly effective bacteriostat. It functions by creating an environment that inhibits the proliferation of most microorganisms that may be inadvertently introduced during a multi-dose withdrawal procedure. This allows for the repeated, aseptic use of the vial for up to 28 days after initial puncture, provided it is stored correctly. It is crucial to note that this formulation is intended for multi-dose use only with compounds that are compatible with Benzyl Alcohol.
3. Optimized pH Balance for Compound Stability:
GenLabs Bacteriostatic Water is carefully adjusted to a slightly acidic pH of approximately 5.7. This is not arbitrary; this pH range is specifically chosen to maximize the stability and solubility of a wide array of peptides and hormonal compounds. A neutral or alkaline pH could lead to accelerated degradation or precipitation of sensitive molecules. Our balanced formula helps maintain the molecular integrity of your reconstituted product from the first dose to the last.
4. Secure, Contamination-Resistant Packaging:
Each 30mL of solution is housed in a sterile, Type I borosilicate glass vial. This pharmaceutical-grade glass is non-reactive, prevents leaching, and ensures the solution remains uncontaminated by the container. The vial is sealed with a sterile bromobutyl rubber stopper, chosen for its superior resealing properties after needle puncture. The entire assembly is secured with an aluminum crimp seal and a distinctive, color-coded flip-off plastic cap, providing a clear, tamper-evident guarantee to the end-user.
5. cGMP Compliance & Traceability:
GenLabs products are manufactured in facilities that adhere to cGMP guidelines. This represents a commitment to quality control far beyond basic standards. It encompasses rigorous documentation, environmental monitoring, raw material testing, and final product release assays. This level of scrutiny provides assurance that every vial is part of a traceable, quality-assured production process.
GenLabs Bacteriostatic Water 30mL is an indispensable diluent across multiple fields:
Peptide Research: The preferred solvent for reconstituting lyophilized (freeze-dried) research peptides for in vitro or laboratory animal studies. Its bacteriostatic property is essential for multi-dose experimental protocols.
Compounding Pharmacy: Used by licensed pharmacists to compound customized injectable medications, including hormone replacement therapies (e.g., testosterone, hCG), pain management solutions, and other sterile preparations.
Veterinary Medicine: Employed in veterinary practices for reconstituting vaccines, antibiotics, and hormones for administration to animals.
Professional and Educational Settings: Used in laboratory training, medical education, and other settings requiring a reliable, multi-dose sterile diluent for practice or specific procedures.
Important Note: This product is a diluent/solvent only. It contains no active pharmaceutical ingredient (API). It must be used by or under the supervision of qualified individuals who understand sterile technique and the properties of the compound being reconstituted.
Proper Reconstitution Technique:
Aseptic Hand Hygiene: Begin by thoroughly washing hands and working in a clean, draft-free environment.
Sanitize Surfaces: Wipe the rubber stopper of both the Bacteriostatic Water vial and the target compound vial with a fresh 70% isopropyl alcohol swab.
Equalize Pressure: Draw a volume of air into your sterile syringe equal to the amount of bacteriostatic water you intend to withdraw. Inject this air into the Bacteriostatic Water vial.
Withdraw Diluent: Invert the vial, withdraw the desired volume of water slowly and carefully.
Reconstitute: Gently inject the water down the side of the target vial containing the lyophilized powder. Avoid directly spraying onto the powder cake. Swirl gently or roll between hands until the solution is completely clear and the powder is fully dissolved. Do not shake vigorously, as this can cause denaturation of fragile proteins/peptides.
Storage: Store the sealed vial at controlled room temperature (20°-25°C or 68°-77°F), protected from light and freezing. After initial puncture, the vial can be stored for up to 28 days. Always inspect the solution visually before each use; it must be clear, colorless, and free of any particles or cloudiness. Discard if contamination is suspected or after the 28-day window.
Uncompromised Safety: The 0.9% Benzyl Alcohol formula is the USP-standard for safe multi-dose use, providing a critical defense against microbial contamination.
Guaranteed Purity: cGMP manufacturing and 0.22-micron filtration deliver a sterile, pyrogen-free product you can trust.
Enhanced Stability: The optimized pH helps preserve the potency and solubility of your valuable reconstituted compounds.
Professional-Grade Packaging: Tamper-evident, sterile glass vial with a resealing rubber stopper ensures product integrity from our facility to your point of use.
Cost-Effective Convenience: The 30mL multi-dose format minimizes waste, making it an economical and practical choice for ongoing research or treatment protocols.
Q: Can this be used for single-dose injections?
A: While it can be, single-dose injections typically require Sterile Water for Injection (SWFI), which contains no preservative. Bacteriostatic Water is specifically designed for multi-dose applications.
Q: Is this safe for human injection?
A: As a sterile, USP-grade pharmaceutical diluent, it is formulated for injection once mixed with a compatible compound. It is NOT for direct intravenous injection as a standalone product. Always follow the guidance of a licensed healthcare provider.
Q: What is the shelf life of an unopened vial?
A: Refer to the expiration date printed on the vial. When stored properly in its sealed condition, it typically has a shelf life of 18-24 months from the date of manufacture.
Q: Why is there a 28-day limit after opening?
A: The bacteriostatic effectiveness of the 0.9% Benzyl Alcohol, combined with the risk of incremental contamination through repeated needle entries, dictates this standard pharmaceutical safety window. Adhering to it is critical.
Q: Is it suitable for all peptides and compounds?
A: Most, but not all. Always verify the compatibility of your specific compound with Benzyl Alcohol. Some specific peptides or individuals with sensitivities may require alternative diluents like Sterile Water for Injection or Sodium Chloride (Bacteriostatic) 0.9%.
Reconstitution is the first and most critical step in activating a lyophilized compound. Choosing an inferior diluent risks contamination, instability, and inaccurate dosing. GenLabs Bacteriostatic Water 30mL eliminates this variable, providing a reliable, professionally trusted foundation for your work.
Whether you are advancing a research hypothesis, compounding a tailored medication, or managing veterinary care, ensure your process begins with the gold standard in sterile dilution.
Order GenLabs Bacteriostatic Water 30mL today—where precision meets purity.
Disclaimer: This product is intended for laboratory research, pharmaceutical compounding, and professional use only. It is not for direct human or animal use without being properly compounded with an active ingredient by a qualified professional. The user assumes all responsibility for the safe and appropriate handling and application of this product. Always consult with a healthcare professional or qualified expert for specific guidance.
On all orders is set at $25.00
Protected by Bitcoin
On all huge orders
Harper Ramirez
This website has a great selection of products. I was able to find exactly what I was looking for and the prices were reasonable. Will definitely shop here again.