Buy Regular (Domestic) online

JACK3D Pre-Workout | Unleash the Original Extreme Energy & Focus

For a generation of athletes, the name wasn’t just a supplement; it was an experience. It was a promise scribbled on tubs in gym bags worldwide. It was the definitive edge. That name is JACK3D, and its legacy is now engineered for the modern warrior. Crafted by USPLabs, JACK3D returns—not as a relic, but as a redefined apex predator in the pre-workout arena. This is not merely a pump product. This is a comprehensive neurological and physiological ignition system designed to shatter plateaus, vaporize mental fog, and propel you into a state of hyper-concentrated, relentless performance.

If your training has felt routine, if the weights haven’t felt lighter, if you’ve been searching for that seismic shift in workout quality—your search ends here. JACK3D is the catalyst.

The JACK3D Phenomenon: Beyond a "Boost"

Ordinary pre-workouts offer a simple stimulant lift. JACK3D orchestrates a symphony of performance. We target the foundational pillars of legendary training sessions: extreme mental drive, explosive physical energy, unparalleled muscular endurance, and powerful vasodilation. The result is a state of mind and body known as "The Tunnel"—a laser-focused, adrenaline-charged zone where distractions cease, pain thresholds elevate, and every rep, sprint, or leap is executed with ruthless intent.

JACK3D is engineered for the individual who views the gym as a proving ground. It is for strength athletes chasing new PRs, for bodybuilders sculpting under extreme volume, for CrossFit® athletes navigating brutal metcons, and for any athlete who demands that their supplement match their ambition.

Deconstructed: The Science of the JACK3D Fire

Every serving of JACK3D is a precision-dosed matrix of clinically researched ingredients, each selected for a definitive role in the performance cascade.

1. The Neurological Launchpad: Extreme Energy & Focus

• Infiniti-Focus™ (150mg Caffeine Anhydrous): The cornerstone. This is not a slow-release blend; it’s a high-purity, rapid-absorption energy surge. It aggressively binds to adenosine receptors in the brain, delaying the perception of fatigue and exhaustion. The mental alertness is sharp and immediate, transforming "I have to workout" into "I get to destroy this workout."

• NeuroFactor™ (100mg Coffee Arabica Fruit Extract): This innovative co-factor works synergistically with caffeine. Derived from the whole coffee fruit, it is clinically shown to increase levels of Brain-Derived Neurotrophic Factor (BDNF)—a key protein for cognitive function, focus, and learning. This isn't just about feeling alert; it's about being acutely connected to your mind-muscle link.

• N-Acetyl L-Tyrosine (300mg): A potent form of the amino acid Tyrosine, a precursor to crucial neurotransmitters like dopamine, norepinephrine, and epinephrine (adrenaline). Under the physical and mental stress of intense training, Tyrosine levels deplete. Supplementation helps maintain cognitive function, drive, and stress resilience, keeping your motivation locked in from the first warm-up set to the final, grinding rep.

2. The Physical Performance Engine: Power, Output & Endurance

• BetaPower™ Pure Betaine (1.5g): A game-changer for strength and power output. Betaine (trimethylglycine) works as an osmolyte, protecting cells from stress, and more critically, it significantly increases the body's production of creatine phosphate—the primary fuel for short, explosive efforts. Peer-reviewed studies consistently show Betaine's ability to increase muscle force, power output, and training volume, meaning you lift heavier, longer.

• Creatine Monohydrate (3g): The most researched, proven performance ingredient in sports nutrition history. JACK3D includes a substantial dose to rapidly saturate muscle phosphocreatine stores. This translates to faster ATP regeneration between reps and sets, drastically improving work capacity, reducing recovery time within your workout, and promoting lean mass gains over time.

• L-Citrulline (3g): The optimal vasodilator. Unlike Citrulline Malate (which is part malic acid), our L-Citrulline is pure and highly dosed. Once converted to L-Arginine in the kidneys, it elevates plasma arginine levels, stimulating the production of Nitric Oxide (NO). This leads to dramatic vasodilation—the "pump." But beyond aesthetics, this enhances blood flow, delivering more oxygen and nutrients (like the creatine and betaine you just ingested) to working muscles while efficiently clearing metabolic waste like lactate and ammonia. The result? Muscles that feel fuller, work harder, and resist fatigue longer.

3. The Metabolic Ignition & Finish

• Velox™ (Rauwolscine [Alpha-Yohimbine] 1.5mg): The final piece of the performance puzzle. This selective alpha-2 adrenergic receptor antagonist promotes a sharp, clean energy feel and supports fat mobilization during training. It helps counteract the vasoconstrictive effects of caffeine in certain fat tissues, promoting a lean, hard, and vascular physique appearance as you train.

The JACK3D Difference: Why This Isn't Just Another Tub

• The Legendary "Feel": There is a distinct, undeniable sensation that defines a true performance pre-workout. JACK3D delivers it—a clean, intense, and focused surge that aligns mind and body for the task ahead.

• Transparent, Impactful Dosing: No proprietary blends that hide ingredient amounts. You see exactly what you're getting, and more importantly, you get doses that are backed by science to actually work.

• No-Fluff Formula: JACK3D is stripped of unnecessary fillers. It’s a potent, concentrated formula where every component has a defined performance role.

• Engineered for the Hardcore: From the stimulant profile to the endurance and power complexes, this formula was built for high-output, high-demand training styles.

Who is JACK3D For?

• Athletes experiencing performance plateaus.

• Strength and power athletes seeking to increase 1RM and volume.

• Bodybuilders and fitness enthusiasts chasing an unparalleled pump and mind-muscle connection.

• Endurance athletes needing sustained power and fatigue resistance.

• Any disciplined trainee with stimulant tolerance seeking a powerful, focused experience.

How to Use for Maximum Effect

Mix one scoop (approximately 9.4g) with 6-8 oz of cold water 20-30 minutes before training. Due to its potent stimulant content, assess your tolerance. Do not exceed one scoop in a 24-hour period. For optimal results, cycle usage (e.g., 8-12 weeks on, 2-4 weeks off). Take on training days only. Do not consume if you are sensitive to stimulants, pregnant, nursing, or under medical supervision. Consult a physician before use.

FAQ: Your Questions, Answered

Q: Is this the "original" JACK3D formula?
A: USPLabs has reformulated JACK3D to meet modern regulatory standards and leverage the latest in sports nutrition science. While the specific ingredient profile has evolved, the core mission—delivering extreme energy, focus, and performance—remains identical, and the "feel" is powerfully familiar.

Q: How does the focus compare to other pre-workouts?
A: The combination of high-dose caffeine, NeuroFactor™, and N-Acetyl L-Tyrosine creates a unique neuro-stimulant stack that promotes both acute alertness and sustained cognitive drive, setting it apart from caffeine-only products.

Q: Can I use this for cardio or just weights?
A: JACK3D is exceptionally versatile. The endurance components (Creatine, Betaine, Citrulline) and energy drivers make it equally effective for high-intensity interval training (HIIT), sprint sessions, sport-specific conditioning, and weight training.

Q: Will I experience a "crash"?
A: The formula is designed for a sharp onset and a gradual, controlled descent. Proper hydration and nutrition post-workout are key to mitigating any residual effects.

Taste the Legacy. Feel the Fury. Stop preparing for mediocre workouts. It’s time to prepare for domination. Add JACK3D to your cart now and experience the reawakening of performance. Your next personal record is waiting.

JACK3D by USPLabs. Enter the Tunnel.

Oxymetholone, commonly known as Anadrol or Anapolon, is an anabolic steroid that belongs to the class of synthetic hormones called androgens. It is primarily used for medical purposes, such as treating certain types of anemia, with its anabolic effects being a secondary benefit.

Oxymetholone 50mg is a specific dosage strength of the drug. It is available in the form of oral tablets, usually in a round shape and colored white. This steroid is considered one of the most potent oral anabolic steroids available.

Oxymetholone works by increasing the production of red blood cells, which helps improve oxygen delivery to the muscles. This leads to increased muscle strength, endurance, and overall performance. It also has a significant impact on protein synthesis, promoting muscle growth and recovery.

Due to its strong anabolic properties, Oxymetholone is often used by bodybuilders and athletes to rapidly increase muscle mass and strength. It can provide noticeable gains in a short period, making it popular for bulking cycles. However, it is important to note that the gains achieved with Oxymetholone are often accompanied by water retention and can be temporary once the drug is discontinued.

Like any other anabolic steroid, Oxymetholone 50mg carries potential side effects. These can include liver toxicity, cardiovascular issues, hormonal imbalances, and suppression of natural testosterone production. It is crucial to use this medication responsibly and under the guidance of a healthcare professional to minimize the risks associated with its use.

It is worth mentioning that the use of Oxymetholone is strictly regulated in many countries, and it is classified as a controlled substance due to its potential for misuse and abuse. It is essential to adhere to the laws and regulations of your country or region regarding the purchase, possession, and use of this steroid.

In conclusion, Oxymetholone 50mg is a powerful anabolic steroid primarily used for medical purposes to treat anemia. However, it is also used by bodybuilders and athletes to enhance muscle mass and strength. It should be used with caution, under professional guidance, and in compliance with legal regulations to minimize the potential risks associated with its use.

Product Name: TB 500 10mg Peptide Vial Kit - with Bacteriostatic Water | Premium Research Compound | GENLABS

SKU: GL-TB500-10-BW
Category: Research Peptides / Synthetic Compounds
Keywords: TB 500, Thymosin Beta-4, TB-500 10mg, peptide research, injury recovery research, cell migration, angiogenesis, research peptide with bacteriostatic water, GENLABS premium, lab-grade peptide, sterile peptide vial.

Introducing GENLABS TB 500 (Thymosin Beta-4): A Premier Research Peptide for Investigating Cellular Repair Mechanisms

Welcome, researchers, to a detailed examination of one of the most intriguing synthetic peptides in modern biomedical study: Thymosin Beta-4 (TB-500). GENLABS is proud to offer this high-purity, lyophilized 10mg TB 500 vial, conveniently bundled with a sterile 30ml vial of Bacteriostatic Water (0.9% Benzyl Alcohol), streamlining your experimental protocol from the outset.

This product page is designed for research professionals only. The information herein is for educational and scientific discussion purposes, detailing the known biochemical properties and research applications of TB-500 as derived from published scientific literature. This compound is sold strictly for in vitro (outside a living organism) laboratory research and is not for human or veterinary use.

What is TB-500 (Thymosin Beta-4)? A Molecular Overview

TB-500 is a synthetic, laboratory-produced version of the naturally occurring 43-amino acid peptide, Thymosin Beta-4. This endogenous peptide is found in high concentrations in blood platelets, wound fluid, and various cell types throughout the body. Its primary research focus centers on its role as a master regulator of actin, a fundamental protein that comprises the cellular cytoskeleton.

The cytoskeleton is not merely a structural scaffold; it is dynamic, governing cell shape, division, motility, and repair. By binding to actin monomers, TB-500 modulates their polymerization, influencing a cascade of critical cellular processes. GENLABS synthesizes TB-500 to a purity of >99%, ensuring your research is not compromised by impurities or truncated sequences, providing a reliable and consistent tool for your investigations.

Key Areas of Scientific Research Interest

Extensive in vitro and animal model studies (as documented in peer-reviewed journals) have highlighted several compelling mechanisms of action that make TB-500 a subject of intense research. Our 10mg vial provides ample material for controlled laboratory studies exploring these pathways:

1. Cell Migration and Motility:

The most pronounced property of TB-500 is its potent ability to enhance cell migration. By regulating actin, it allows cells such as endothelial cells (which line blood vessels), keratinocytes (skin cells), and mesenchymal stem cells to move more effectively across a substrate. This is a cornerstone process in tissue repair, where cells must travel to a site of injury to initiate healing.

2. Angiogenesis (New Blood Vessel Formation):

Research indicates TB-500 may upregulate key angiogenic factors like VEGF (Vascular Endothelial Growth Factor). Promoting the growth of new capillaries from existing vasculature is vital for delivering oxygen and nutrients to damaged tissues, facilitating removal of waste products, and establishing a framework for regeneration.

3. Anti-Inflammatory Activity:

Studies suggest TB-500 can modulate inflammatory pathways, potentially reducing the expression of pro-inflammatory cytokines. By helping to control the excessive or prolonged inflammatory phase of injury, the peptide may create a more conducive microenvironment for the subsequent proliferative and remodeling phases of healing.

4. Extracellular Matrix (ECM) Remodeling:

The peptide appears to influence the production and organization of ECM components like collagen. It may upregulate matrix metalloproteinases (MMPs) responsible for degrading damaged tissue and increase the deposition of new, structured collagen fibers, potentially improving tensile strength and elasticity of repaired tissue.

5. Cell Survival (Anti-Apoptosis):

Emerging research points to a potential role for TB-500 in promoting cell survival under stressful conditions. It may activate specific cell survival pathways, helping to protect vulnerable cells in the harsh microenvironment of an injury site from programmed cell death (apoptosis).

Why Choose GENLABS TB 500 10mg Vial Kit?

1. Uncompromising Purity & Verification: Every batch of GENLABS TB-500 is synthesized using advanced solid-phase peptide synthesis (SPPS) and undergoes rigorous HPLC (High-Performance Liquid Chromatography) and Mass Spectrometry (MS) analysis. A Certificate of Analysis (CoA) is available upon request, confirming amino acid sequence and purity exceeding 99%.

2. Sterile, Lyophilized Presentation: The peptide is provided as a sterile, lyophilized (freeze-dried) white powder in a sealed, neutral glass vial. Lyophilization ensures maximum stability and longevity when stored correctly, preventing degradation.

3. Complete Kit with Bacteriostatic Water: We include a sterile 30ml vial of Bacteriostatic Water (0.9% Benzyl Alcohol). The bacteriostatic agent prevents bacterial growth in the reconstituted solution for extended periods under refrigerated conditions, allowing for multi-use in a laboratory setting while maintaining sterility. Note: For certain sensitive in vitro assays, researchers may opt to use sterile saline or other buffers.

4. Precision Dosage & Consistency: The 10mg quantity is a standard and versatile concentration for laboratory research, allowing for precise molar calculations and serial dilutions to create a wide range of concentrations for cell culture or other experimental models.

5. Transparent Sourcing & Compliance: GENLABS operates with full transparency. Our peptides are for research use only (RUO). This product is intended for controlled laboratory environments by qualified researchers.

Researcher Instructions: Handling, Reconstitution & Storage

• Storage (Unreconstituted): Store the lyophilized vial in a cool, dark place, ideally at 2-8°C (36-46°F). For long-term storage (over 6 months), keeping the vial at -20°C (-4°F) is recommended.

• Reconstitution (Aseptic Technique Required): All procedures must be performed in a sterile laminar flow hood using appropriate personal protective equipment (PPE).

  1. Gently tap the lyophilized vial to collect powder at the bottom.

  2. Clean the rubber stoppers of both the peptide and bacteriostatic water vials with a sterile alcohol swab.

  3. Draw a calculated volume of bacteriostatic water into a sterile syringe. The volume determines the final concentration (e.g., 1ml yields a 10mg/ml solution; 2ml yields a 5mg/ml solution).

  4. Slowly inject the diluent down the side of the peptide vial to avoid aggressive force on the powder.

  5. Gently swirl or roll the vial until the peptide is fully dissolved. Do not shake vigorously, as this can cause denaturation.

• Storage (Reconstituted): The reconstituted solution should be stored refrigerated at 2-8°C (36-46°F) and used within a timeframe appropriate for sterile laboratory reagents (typically 21-30 days with bacteriostatic water).

• Handling: This product is a potent bioactive peptide. Handle with care using appropriate laboratory gloves. Avoid inhalation or direct contact with skin or mucous membranes.

Disclaimer of Critical Importance

GENLABS TB-500 is a chemical for laboratory research purposes only. It is not intended for diagnostic, therapeutic, or human consumption uses. It has not been evaluated or approved by the FDA or any other regulatory body for the treatment, cure, or prevention of any disease or condition. The sale of this product is conditional upon the buyer's agreement that they are a qualified researcher working within a licensed laboratory setting and will adhere to all applicable laws and regulations governing the handling of research chemicals. By purchasing this product, you attest that you understand and agree to these terms.

Explore the Frontiers of Repair Biology

The GENLABS TB 500 10mg Kit provides a reliable, high-quality tool to delve into the complex biology of tissue repair, cellular dynamics, and regenerative pathways. Its well-documented mechanisms on actin regulation offer a window into fundamental physiological processes.

Order your GENLABS TB 500 10mg Vial with Bacteriostatic Water today to advance your scientific inquiries with confidence and precision.

**Turinabol 20mg: Detailed Description**

Turinabol 20mg, also known as Oral Turinabol or simply Tbol, is an anabolic androgenic steroid (AAS) that is derived from testosterone. Developed in the 1960s by East German pharmaceutical company Jenapharm, it was primarily used for enhancing athletic performance and was famously used by East German athletes during the Olympic Games.

**Chemical Structure and Mechanism of Action:**
Turinabol is a modified form of Dianabol (Methandrostenolone) with an added chlorine atom at the 4th carbon position. This modification significantly reduces its androgenic properties while enhancing its anabolic effects. The result is a milder steroid that promotes muscle growth with less risk of androgenic side effects.

Turinabol works by binding to the androgen receptors in the body, which stimulates the cells to increase protein synthesis and nitrogen retention. This leads to an increase in muscle mass, strength, and overall physical performance.

**Benefits of Turinabol 20mg:**
1. Muscle Growth: Turinabol promotes lean muscle growth by increasing protein synthesis and reducing muscle breakdown. This results in improved muscle size, density, and strength gains.

2. Enhanced Performance: Athletes often use Turinabol to improve their performance. It boosts endurance, speed, and power, allowing athletes to train harder and longer.

3. Improved Recovery: Turinabol helps in reducing muscle damage and inflammation, leading to faster recovery after intense workouts or injuries.

4. Low Androgenic Side Effects: Turinabol is known for its low androgenic activity, making it less likely to cause side effects such as hair loss, acne, and aggression, compared to other anabolic steroids.

5. Mild Estrogenic Activity: Turinabol has minimal estrogenic activity, meaning it doesn't cause water retention or gynecomastia (male breast enlargement) commonly associated with other steroids.

**Dosage and Administration:**
The typical dosage of Turinabol for performance enhancement ranges from 20mg to 40mg per day. However, it is important to note that individual responses may vary, and dosage should be determined based on personal goals, experience, and tolerance.

The cycle duration for Turinabol is typically 6-8 weeks. It is recommended to start with a lower dosage and gradually increase it to assess the body's response and minimize potential side effects.

**Potential Side Effects:**
While Turinabol is considered a milder steroid with low androgenic and estrogenic activity, it may still cause some side effects. These can include:

1. Suppression of natural testosterone production
2. Liver toxicity (at higher doses or prolonged use)
3. Mild cardiovascular risks (cholesterol imbalances)
4. Virilization symptoms in women (deepening of the voice, body hair growth, etc.)

It is essential to consult with a healthcare professional before using Turinabol or any other steroid to ensure proper dosage, monitoring, and minimize potential risks.

**Conclusion:**
Turinabol 20mg is a popular anabolic steroid known for its muscle-building and performance-enhancing properties. It offers significant benefits in terms of muscle growth, improved performance, and faster recovery, while having a lower potential for androgenic and estrogenic side effects compared to other steroids. However, it is crucial to use Turinabol responsibly, under the guidance of a healthcare professional, to ensure safety and optimal results.

GHRP-2 (Growth Hormone Releasing Peptide-2) is a synthetic peptide consisting of six amino acids. It belongs to a class of peptides known as growth hormone secretagogues, which stimulate the release of growth hormone from the pituitary gland.

GHRP-2 works by binding to specific receptors in the hypothalamus and pituitary gland, leading to an increase in the production and release of growth hormone. This peptide is designed to mimic the action of ghrelin, a natural hormone that stimulates hunger and growth hormone secretion.

One of the main benefits of GHRP-2 is its ability to enhance the production of growth hormone, which has numerous effects on the body. Growth hormone plays a vital role in promoting muscle growth, fat loss, and overall body composition. It also has a positive impact on bone density, collagen synthesis, and organ health.

By increasing growth hormone levels, GHRP-2 may help to accelerate muscle recovery and repair, improve athletic performance, and increase muscle mass. It can also promote fat metabolism, leading to enhanced fat burning and a leaner physique. Additionally, GHRP-2 has been reported to have potential anti-inflammatory effects and may improve immune function.

When using GHRP-2, it is important to note that it is typically administered via subcutaneous injection. The recommended dosage for GHRP-2 is around 100-300 micrograms per injection, with two to three injections per day. However, it is essential to consult with a healthcare professional or peptide specialist to determine the appropriate dosage and frequency for your specific needs.

It is worth mentioning that the use of GHRP-2 or any other peptide should always be done under medical supervision. Peptides may have potential side effects and interactions with other medications. Therefore, it is crucial to discuss your health history and any existing conditions with a healthcare professional before starting GHRP-2 or any peptide therapy.

Overall, GHRP-2 is a synthetic peptide that stimulates the release of growth hormone in the body. It has the potential to enhance muscle growth, fat loss, and overall body composition. However, it is important to use it responsibly and with guidance from a healthcare professional.

GenLabs CJC-1295 (Without DAC) 5mg Vial with Bacteriostatic Water

In the rigorous world of metabolic and regenerative research, precision, purity, and biological mimicry are paramount. GenLabs introduces its flagship Growth Hormone-Releasing Hormone (GHRH) analog: CJC-1295 (Without DAC) 5mg Vial, presented with a complimentary 2ml vial of USP-grade Bacteriostatic Water. This formulation represents the cutting edge in peptide science, designed for researchers seeking to explore the profound effects of endogenous, pulsatile growth hormone (GH) secretion without the extended half-life modification of Drug Affinity Complex (DAC). For investigations focused on sleep-cycle GH pulses, fat metabolism, cellular repair, and lean tissue accretion, this compound offers an unparalleled tool for accurate physiological modeling.

Understanding the Molecule: CJC-1295 "Mod GRF 1-29"

CJC-1295 is a synthetic analog of the natural Growth Hormone-Releasing Hormone (GHRH, comprising 44 amino acids). The GenLabs variant specifically uses the truncated, more stable, and potent 29-amino acid sequence known in research literature as Mod GRF 1-29. The critical distinction lies in the "Without DAC" designation.

• With DAC: CJC-1295 with DAC binds irreversibly to albumin in the bloodstream, creating a drug reservoir that releases continuously for days, leading to a sustained, non-physiological elevation of GH and IGF-1.

• Without DAC (This Product): Our CJC-1295 is without DAC. This means it acts almost identically to the body's native GHRH. It stimulates the pituitary gland’s somatotroph cells, inducing a strong, transient, and pulsatile release of growth hormone that closely mimics the body's natural secretory patterns—particularly the major pulses during deep-wave sleep and post-exercise. This makes it an essential compound for research into circadian hormone rhythms, natural anabolic processes, and targeted metabolic interventions.

Key Research Applications & Mechanistic Pathways

GenLabs CJC-1295 (Without DAC) is utilized in preclinical research models to study:

1. Pulsatile GH Secretion & Circadian Biology: To investigate the role of natural GH pulses in sleep quality, tissue repair overnight, and morning metabolic rates. Its short half-life (~30 minutes) allows for precise timing of pulses, mirroring endogenous cycles.

2. Lipolysis & Body Composition: Research indicates that pulsatile GH release is a potent trigger for lipolysis (fat breakdown). Studies may explore its role in mobilizing stored triglycerides for energy, potentially impacting adipocyte (fat cell) metabolism and reducing visceral fat accumulation.

3. Protein Synthesis & Muscle Recovery: By elevating IGF-1 levels downstream of GH release, this peptide is a tool for examining pathways related to muscle protein synthesis, nitrogen retention, and the repair of musculoskeletal tissues following stress or damage.

4. Cellular Regeneration & Longevity Pathways: GH and IGF-1 play roles in the maintenance of tissues, skin, bone density, and organ health. Research using this precise analog can probe its effects on collagen synthesis, wound healing, and markers of cellular turnover.

5. Synergistic Potentiation: A primary area of advanced research involves the synergistic effect of GHRH analogs with other secretagogues, most notably Ipamorelin. The combination is studied for creating a more potent and selective GH pulse, as Ipamorelin suppresses somatostatin (the hormone that inhibits GH), allowing CJC-1295 to act unopposed.

Why Choose GenLabs CJC-1295 (Without DAC)?

1. Ultra-High Purity (≥99%): Every batch is synthesized using state-of-the-art solid-phase peptide synthesis (SPPS) and purified via HPLC. Each vial includes a Certificate of Analysis (CoA) from an independent, ISO-certified third-party laboratory, confirming identity, purity, and absence of residual solvents or microbial contaminants.

2. Sterile, Lyophilized Powder: The 5mg of active peptide is presented as a sterile, lyophilized (freeze-dried) white powder in a sealed, neutral glass vial. This ensures stability, longevity, and easy reconstitution.

3. Included Bacteriostatic Water (2ml, 0.9% Benzyl Alcohol): We provide a complimentary vial of USP-grade Bacteriostatic Water. The 0.9% benzyl alcohol preserves sterility after reconstitution, allowing multi-dose use when handled correctly under aseptic conditions. This water is specifically formulated for peptide reconstitution.

4. Rigorous Quality Assurance: Manufactured in an ISO 9001 certified facility, our peptides are subjected to Mass Spectrometry (MS) for identity confirmation and HPLC for purity quantification. Vials are filled and capped in a controlled environment.

5. Clarity in Labeling & Use: We provide clear distinctions between "With DAC" and "Without DAC" products to prevent research protocol errors. Our labeling includes batch numbers and expiration dates for full traceability.

Reconstitution, Storage & Handling Protocol

Important Note: This product is for laboratory research use only. It is not for human or veterinary consumption.

• Reconstitution: Using aseptic technique, gently inject the provided Bacteriostatic Water into the peptide vial. Aim the stream against the glass wall to avoid aggressive agitation. Roll gently between hands until the solution is clear and completely dissolved. Do not shake.

• Storage: Store the unreconstituted vial in a cool, dark place (optimally at 2-8°C / 36-46°F). After reconstitution, the solution must be refrigerated and used within a defined research timeframe (typically 14-21 days when handled sterilely) due to the absence of preservatives in the peptide vial itself.

• Dosing Considerations (Research Models): In research settings, dosing is weight-based and timed to mimic natural pulses. Common research protocols involve administration once to twice daily, often in the evening or post-activity. Precise dosing parameters are determined by the specific experimental design.

GenLabs: Your Partner in Advanced Peptide Research

GenLabs is committed to empowering the scientific community with reliable, high-fidelity research compounds. We understand that the integrity of your data begins with the integrity of your reagents. Our CJC-1295 (Without DAC) is more than a peptide; it is a meticulously crafted tool designed to help you uncover the nuanced workings of the somatotropic axis with confidence.

FAQ

Q: What is the difference between CJC-1295 With DAC and Without DAC?
A: The DAC (Drug Affinity Complex) modification creates a long-acting release profile (half-life of several days). "Without DAC" has a short half-life (~30 min), producing a brief, pulsatile GH release that mimics the body's natural pattern.

Q: Why is Bacteriostatic Water included?
A: Bacteriostatic Water contains 0.9% benzyl alcohol, which inhibits bacterial growth. This allows the reconstituted peptide solution to be used multiple times over a short period when stored correctly, reducing waste and cost for research.

Q: What is the purity of this product?
A: Every batch is guaranteed to be ≥99% pure, as verified by independent third-party HPLC analysis. The CoA is available upon request or via our website using the batch number.

Q: How should this be stored long-term?
A: For long-term stability (up to 2 years), keep the sealed, lyophilized vial frozen at or below -20°C (-4°F). For daily use, refrigerated storage is sufficient.

Order Your Research Supply Today

Navigate the complexities of growth hormone research with precision. Select GenLabs CJC-1295 (Without DAC) 5mg Vial for a compound that delivers accuracy, purity, and physiological relevance. Explore our full catalog of synergistic peptides, including Ipamorelin, for comprehensive study designs.

Drostanolone Enanthate, also known as Masteron Enanthate, is a synthetic anabolic androgenic steroid (AAS) derived from dihydrotestosterone (DHT). It is highly regarded in the bodybuilding and athletic communities for its unique properties and benefits. In this detailed description, we will delve into the various aspects of Drostanolone Enanthate, including its history, chemical structure, mechanism of action, medical uses, dosage, side effects, and more.

History:
Drostanolone Enanthate was first introduced in the 1970s by the pharmaceutical company Syntex. Initially, it was developed for medical purposes, specifically as a treatment for advanced breast cancer in postmenopausal women. However, due to its potent anabolic properties, it gained popularity among athletes and bodybuilders for its ability to enhance muscle growth, strength, and overall physical performance.

Chemical Structure:
Drostanolone Enanthate is a modified form of DHT, with an added Enanthate ester. This modification allows for a slower release of the hormone into the body after administration, resulting in a longer half-life and reduced frequency of injections. The molecular formula of Drostanolone Enanthate is C27H44O3, and its molecular weight is 416.646 g/mol.

Mechanism of Action:
As an anabolic steroid, Drostanolone Enanthate exerts its effects by binding to androgen receptors in various tissues throughout the body. This interaction stimulates protein synthesis, leading to increased muscle mass, strength, and endurance. Additionally, it enhances nitrogen retention, which promotes a positive nitrogen balance and an anabolic environment within the muscle cells.

Medical Uses:
While Drostanolone Enanthate is primarily used in the realm of performance enhancement, it does have a few medical applications. It has been used as a palliative treatment for breast cancer in postmenopausal women who have failed other therapies. Additionally, it has been investigated as a potential treatment for muscle wasting conditions and osteoporosis.

Dosage and Administration:
The dosage of Drostanolone Enanthate varies depending on the individual's goals, experience level, and tolerance. For male athletes and bodybuilders, a common dosage ranges from 200mg to 600mg per week. Due to its long-acting nature, it is typically administered once or twice weekly. Female users, on the other hand, are advised to use much lower doses, typically around 50mg to 100mg per week, to minimize the risk of virilization.

Side Effects:
Like any other anabolic steroid, Drostanolone Enanthate carries the risk of side effects. These can include androgenic effects such as acne, oily skin, increased facial and body hair growth, and potential virilization in women. It can also suppress natural testosterone production, leading to potential hormonal imbalances. Other possible side effects include cardiovascular strain, liver toxicity, and mood changes.

Interactions and Precautions:
Drostanolone Enanthate should not be used by individuals with a history of hypersensitivity to the drug or its components. It is contraindicated in pregnant and breastfeeding women due to the potential risk to the fetus or infant. It is also important to note that anabolic steroids, including Drostanolone Enanthate, are classified as controlled substances in many countries and should only be used under medical supervision and with a prescription.

Conclusion:
Drostanolone Enanthate, or Masteron Enanthate, is a powerful anabolic steroid with unique properties. It offers athletes and bodybuilders the potential to enhance their physique and performance. However, it is crucial to use this substance responsibly, with proper knowledge of dosage, administration, and potential side effects. As with any steroid, it is recommended to consult with a healthcare professional before starting its use to ensure safety and efficacy.

MK-2866 (Ostarine): A Detailed Description

MK-2866, also known as Ostarine, is a selective androgen receptor modulator (SARM) that was initially developed to treat muscle wasting and osteoporosis. It is a synthetic compound that binds to androgen receptors in the body, selectively stimulating them for specific effects.

Mechanism of Action: MK-2866 works by binding to androgen receptors in the muscles and bones, leading to an increase in protein synthesis, muscle growth, and bone density. Unlike anabolic steroids, it has a selective action, targeting specific tissues without causing unwanted side effects on other organs.

Benefits and Uses:

1. Muscle Building: MK-2866 stimulates the growth of lean muscle mass, making it popular among athletes, bodybuilders, and fitness enthusiasts. It promotes muscle development by increasing protein synthesis and nitrogen retention.

2. Strength Enhancement: Ostarine can improve strength levels, enabling users to lift heavier weights and perform better during workouts. This can lead to increased muscle power and overall athletic performance.

3. Injury Recovery: Due to its anabolic properties, MK-2866 has been used to aid in injury recovery. It may help preserve muscle mass and promote healing in cases of muscle strains, fractures, or post-surgical recovery.

4. Bone Health: Studies suggest that Ostarine may help improve bone density and prevent age-related bone loss. This makes it a potential treatment for conditions like osteoporosis and other bone-related disorders.

5. Fat Loss: Ostarine can aid in fat loss by promoting an increase in muscle mass, which in turn boosts metabolism. This can help with achieving a leaner physique and reducing body fat percentage.

Dosage and Side Effects: MK-2866 is typically taken orally, and the recommended dosage ranges from 10 to 30mg per day, depending on the individual's goals and experience level. However, it's important to note that SARMs are not approved for human consumption or medical use, and their long-term effects and safety are not yet fully understood.

While Ostarine is generally considered to have fewer side effects compared to traditional anabolic steroids, it can still cause mild suppression of natural testosterone production. Other potential side effects may include headaches, nausea, fatigue, and changes in lipid profiles.

Legality and Precautions: The legal status of MK-2866 varies by country, so it is essential to check local regulations before purchasing or using it. As with any performance-enhancing substance, it's crucial to use MK-2866 responsibly and under the guidance of a healthcare professional.

In conclusion, MK-2866 (Ostarine) is a selective androgen receptor modulator that has gained popularity for its potential benefits in muscle building, strength enhancement, injury recovery, bone health, and fat loss. However, more research is needed to fully understand its long-term effects and ensure its safe use.