MOTS-C 10MG – GENLABS2ML BACTERIOSTATIC WA

Unlock Unparalleled Muscle Growth and Recovery with GenLabs IGF 1 – DES (1-3) – 2mg/vial

In the relentless pursuit of peak physical performance, accelerated recovery, and superior body composition, advanced researchers are continually exploring the frontiers of peptide science. Standing at the vanguard of this exploration is Insulin-like Growth Factor 1, a pivotal regulator of anabolism. GenLabs, a name synonymous with precision and purity in research biochemistry, introduces a highly specialized and potent variant: IGF 1 – DES (1-3) – 2mg/vial, complete with complimentary bacteriostatic water. This product represents a significant leap in targeted growth factor research, engineered for those demanding rapid, localized, and profound tissue-repairing effects.

Decoding the Science: What is IGF-1 DES (1-3)?

To appreciate the innovation behind GenLabs IGF-1 DES, one must first understand its parent molecule, IGF-1. Naturally produced in the liver, IGF-1 is a primary mediator of growth hormone's effects, playing crucial roles in cellular proliferation, differentiation, and survival, particularly in muscle, bone, and nervous tissue. However, in its endogenous form, over 99% of IGF-1 is bound to IGF Binding Proteins (IGFBPs), which regulate its activity and half-life, effectively slowing and systemicizing its effects.

IGF-1 DES (1-3), where "DES" stands for "Des(1-3)," is a truncated, analog form. It has been genetically engineered with the removal of the first three amino acids (glutamic acid, proline, and glutamate) from the N-terminus of the native IGF-1 peptide. This deliberate modification is transformative, conferring two critical advantages for targeted research:

1. Dramatically Reduced Binding Affinity: The DES variant exhibits an extremely low affinity for IGFBPs. This means it circulates almost entirely in its free, bioactive form, making it immediately available to bind with IGF-1 receptors on target cells.

2. Potentiated Biological Activity: Studies suggest that the free IGF-1 DES molecule can be up to ten times more potent than its native counterpart in various bioassays, eliciting a much stronger anabolic and proliferative signal upon receptor binding.

The result is a research peptide with a significantly shorter systemic half-life but exponentially greater localized potency at the site of administration, making it an ideal candidate for studies focused on myofibrillar hypertrophy, tendon/ligament repair, and localized hyperplasia.

GenLabs Commitment: The Gold Standard in Peptide Integrity

In a market where consistency and authenticity are paramount, GenLabs sets the benchmark. Our IGF-1 DES is synthesized and purified under stringent cGMP (current Good Manufacturing Practice) guidelines, ensuring every vial meets uncompromising standards.

• Ultra-High Purity (>99%): Each batch is verified via HPLC (High-Performance Liquid Chromatography) and mass spectrometry, guaranteeing a product free from impurities, truncations, or filler peptides.

• Precise Lyophilization: The peptide is meticulously lyophilized (freeze-dried) into a stable, sterile powder within a sealed, nitrogen-backfilled vial to ensure long-term stability and potency.

• Sterile, ISO-Compliant Production: The entire process occurs in an ISO-certified facility, utilizing sterile filters and aseptic techniques to guarantee a contaminant-free product ready for research use.

• Third-Party Analytical Verification: Certificates of Analysis (CoA) are available, providing transparent, laboratory-confirmed data on purity, amino acid sequence, and molecular weight.

Included Bacteriostatic Water: Ensuring Optimal Reconstitution and Stability

Understanding that the integrity of a peptide is only as good as its reconstitution, GenLabs includes a complimentary vial of sterile, multi-dose Bacteriostatic Water (0.9% Benzyl Alcohol) with every order. This is not merely an accessory but a critical component:

• Preservation: The 0.9% benzyl alcohol inhibits bacterial growth, allowing the reconstituted solution to remain stable and sterile for extended periods when refrigerated (typically 7-10 days).

• Optimal pH & Sterility: Specifically formulated for peptide reconstitution, it ensures the peptide goes into solution correctly without degrading.

• Convenience & Safety: Researchers receive a complete, compatible kit, eliminating the need to source sterile water separately and ensuring procedural consistency.

Primary Research Applications and Potential Mechanisms

GenLabs IGF-1 DES (1-3) is intended for in vitro (cell culture) and in vivo (animal model) scientific investigation. Its unique properties make it a compelling subject for studies in several key areas:

1. Skeletal Muscle Hypertrophy and Hyperplasia Research:
IGF-1 is a master regulator of the PI3K/Akt/mTOR pathway, the primary anabolic signaling cascade in muscle cells. The potent, localized effect of IGF-1 DES makes it ideal for studying:

• Myofibrillar Protein Synthesis: Investigating rapid activation of satellite cells (muscle stem cells) and their fusion into existing myofibers to increase cross-sectional area.

• Muscle Hyperplasia: Exploring the potential for promoting the division of satellite cells to form entirely new muscle fibers, a phenomenon of great interest in muscle biology.

2. Connective Tissue and Injury Recovery Studies:
Tendons, ligaments, and cartilage have dense populations of IGF-1 receptors. Research can focus on:

• Collagen Synthesis: Examining the upregulation of collagen types I and III, the primary structural proteins in tendons and ligaments, for enhanced tensile strength and repair.

• Tenocyte & Chondrocyte Proliferation: Studying the mitogenic effects on tendon cells (tenocytes) and cartilage cells (chondrocytes) to accelerate healing in models of strain or overuse.

3. Localized Fat Metabolism (Lipolysis):
While systemic effects are minimized, localized research indicates IGF-1 can enhance lipid metabolism in adipose tissue. Studies may investigate its role in promoting lipolysis (fat breakdown) and inhibiting lipogenesis (fat storage) in site-specific adipose depots.

4. Neurotrophic and Cognitive Function Exploration:
IGF-1 receptors are abundant in the central nervous system. Research avenues include:

• Neuroprotection & Synaptic Plasticity: Examining potential protective effects on neurons and the enhancement of synaptic connections, relevant to models of cognitive decline or neural injury.

• Peripheral Nerve Regeneration: Studying its role in supporting the repair and myelination of peripheral nerves after damage.

Precision in Handling and Administration (Research Guidelines)

For investigative purposes, proper handling is non-negotiable.

• Storage: Keep lyophilized powder refrigerated at 2-8°C (36-46°F). After reconstitution with the provided bacteriostatic water, the solution must be stored refrigerated and used within the stability window (typically 7-10 days).

• Reconstitution: Using aseptic technique, slowly inject the bacteriostatic water down the side of the peptide vial. Gently swirl or roll—do not shake vigorously—until the powder is fully dissolved, yielding a clear solution.

• Research Considerations: Due to its short half-life (minutes) and potent localized action, research protocols often involve precise, site-specific administration to study acute, targeted effects rather than systemic outcomes.

Why Choose GenLabs IGF-1 DES (1-3)?

• Unrivaled Potency: The DES (1-3) analog offers a direct, powerful anabolic signal unmatched by standard IGF-1.

• GenLabs Quality Guarantee: cGMP synthesis, triple-phase testing, and guaranteed >99% purity.

• Complete Research Solution: Includes high-quality bacteriostatic water for immediate, proper reconstitution.

• Targeted Action Profile: Ideal for studies requiring localized, non-systemic effects on muscle, connective tissue, and fat metabolism.

• Transparency and Trust: Batch-specific third-party CoAs ensure you know exactly what you are researching.

Disclaimer: GenLabs IGF 1 – DES (1-3) – 2mg/vial is sold strictly as a research chemical for laboratory use only, in accordance with all applicable laws and regulations. It is not for human or veterinary use, not for injection, and not for consumption. It is the sole responsibility of the purchasing researcher to handle all products safely and in compliance with local, state, and federal guidelines.

Elevate your research into the mechanisms of growth, repair, and metabolism. Choose GenLabs IGF-1 DES for precision, potency, and unparalleled quality in peptide science.

Genlabs BPC-157 – 20mg/Vial: The Premier Systemic Repair Peptide for Advanced Research

Product Name: Genlabs BPC-157 – 20mg/Vial (with Bacteriostatic Water)
SKU: GL-BPC157-20
Catalog: Research Peptides

Introduction: Redefining the Frontier of Systemic Recovery Research

In the rigorous field of research peptides, few compounds have generated as much scientific interest for their broad-spectrum systemic properties as BPC-157. Genlabs, a name synonymous with precision and purity, presents its flagship BPC-157 – 20mg/Vial, meticulously synthesized and paired with sterile Bacteriostatic Water. This high-concentration formulation is designed for the discerning researcher seeking to investigate the remarkable regenerative and protective mechanisms of this stable peptide fragment. Our 20mg vial offers exceptional value and flexibility, allowing for precise dosing regimens in controlled experimental settings focused on musculoskeletal, gastrointestinal, and systemic inflammatory responses.

Genlabs’ commitment to excellence ensures every batch is verified for >99% purity, is sterile-filtered, and undergoes independent third-party analysis (COA available). This product is presented strictly for in-vitro and research applications in laboratory settings.

What is BPC-157? A Scientific Overview

BPC-157 (Body Protection Compound-157) is a synthetic peptide sequence comprising 15 amino acids, derived from a protective protein found in human gastric juice. Unlike larger, more fragile proteins, this pentadecapeptide is renowned for its exceptional stability and systemic effects in research models. It is not a growth hormone or a steroid; rather, it is characterized as a "protective modulator" with a unique mechanism of action centered on promoting cellular survival, angiogenesis (formation of new blood vessels), and tissue repair across a wide range of systems.

Its proposed research profile suggests it operates through several key pathways: promoting VEGF (Vascular Endothelial Growth Factor) expression for improved blood flow to injured sites, modulating inflammatory cytokine responses to maintain a balanced healing environment, and stimulating the synthesis of collagen and other structural proteins. This multi-modal approach has made BPC-157 a subject of extensive preclinical investigation.

Genlabs BPC-157 – 20mg: Key Features & Advantages

1. Uncompromising Purity & Verification: Each batch is synthesized using state-of-the-art solid-phase peptide synthesis (SPPS) and undergoes rigorous HPLC (High-Performance Liquid Chromatography) and MS (Mass Spectrometry) testing. The certificate of analysis confirms a purity level of >99%, ensuring your research is not compromised by contaminants or filler peptides.

2. Optimal Concentration & Format: The 20mg per vial format is ideal for extended research protocols. This substantial quantity provides researchers with ample material for longitudinal studies or higher-dose investigations without frequent replenishment, ensuring consistency across the experimental timeline.

3. Included Bacteriostatic Water: Each order includes a separate vial of sterile, USP-grade 0.9% Bacteriostatic Sodium Chloride Injection (containing 0.9% benzyl alcohol). This eliminates the need for separate sourcing and guarantees compatibility, making the reconstitution process seamless and aseptic.

4. Lyophilized for Maximum Stability: The peptide is provided in a stable, freeze-dried (lyophilized) powder form within a sterile glass vial. This preservation method ensures long-term stability when stored correctly, protecting the integrity of the molecular structure until reconstitution.

5. Sterile-Filtered & Prepared in a cGMP-Compliant Facility: Our manufacturing process adheres to current Good Manufacturing Practices (cGMP). The solution is sterile-filtered through a 0.22-micron filter before lyophilization, a critical step to ensure sterility and researcher safety.

6. Comprehensive Third-Party Testing: Beyond in-house QC, samples from every lot are sent to an independent, ISO-certified laboratory for confirmatory analysis. The resulting Certificate of Analysis (COA) is transparently available, providing verified data on purity, weight, and absence of endotoxins or microbial growth.

Primary Research Applications & Investigative Pathways

*Disclaimer: The following are well-documented areas of scientific inquiry based on preclinical studies. Genlabs BPC-157 is sold for laboratory research use only.*

• Musculoskeletal & Tendon-Ligament Repair: A primary focus of BPC-157 research is its potential to accelerate the healing of various connective tissues. Studies have investigated its effects on models of tendon-to-bone healing, muscle fiber regeneration, and ligament repair. Its proposed angiogenic and collagen-stimulating properties are of particular interest in this domain.

• Gastrointestinal System Protection & Healing: Given its origin, significant research explores BPC-157's protective effects on the GI tract. Investigations include models of gastric ulcers, inflammatory bowel conditions, and intestinal anastomosis healing. It is studied for its potential to promote mucosal integrity and modulate local blood flow.

• Systemic Anti-Inflammatory Modulation: Researchers examine BPC-157's role in influencing systemic inflammatory responses. Its interaction with key inflammatory pathways (e.g., TNF-alpha, COX-2) is a subject of interest for creating a balanced cellular environment conducive to recovery.

• Organ Protection & Support: Emerging research vectors include investigating BPC-157's potential protective effects on the liver (in toxin-exposed models), heart (in ischemia-reperfusion injury models), and nervous system.

• Angiogenesis & Wound Healing: The peptide's strong association with promoting VEGF-driven angiogenesis places it at the center of wound healing research, particularly in models of impaired healing or compromised blood supply.

Reconstitution, Storage, and Handling Protocol

Storage (Lyophilized Powder): Store immediately upon receipt in a freezer at -20°C or below. For long-term storage (over 6 months), a temperature of -80°C is recommended. Keep the vial in its original desiccated state and protected from light.

Reconstitution:

1. Gently swirl the vial of Bacteriostatic Water to mix.

2. Using aseptic technique, draw the desired volume of bacteriostatic water into a sterile syringe.

3. Slowly inject the water down the side of the vial containing the BPC-157 lyophilized powder. Avoid directing a high-pressure stream directly onto the powder.

4. Gently swirl or roll the vial until the powder is fully dissolved. Do not shake vigorously, as this can cause denaturation of the peptide.

Storage (Reconstituted Solution): Once reconstituted with bacteriostatic water (which contains a preservative), the solution should be refrigerated at 2-8°C (36-46°F). Under these conditions, stability is typically maintained for up to 21 days. For optimal potency, many researchers prefer to use the solution within 7-10 days. Aliquotting into smaller, sterile vials can minimize repeated freeze-thaw cycles if freezing the reconstituted solution is necessary.

Why Choose Genlabs for Your Peptide Research?

Genlabs stands apart in the research peptide industry through an unwavering dedication to scientific integrity:

• Transparency is Paramount: We provide batch-specific, third-party COAs, not generic datasheets.

• Purity-First Philosophy: Our >99% purity standard is non-negotiable, ensuring reliable and reproducible research outcomes.

• Researcher-Centric Formatting: The inclusion of bacteriostatic water and high-concentration vials is designed for convenience and experimental flexibility.

• Compliance & Ethics: We operate with strict adherence to legal and ethical guidelines, supplying products exclusively to verified research institutions and qualified professionals for laboratory investigation.

Product Specifications:

• Sequence: Gly-Glu-Pro-Pro-Pro-Gly-Lys-Pro-Ala-Asp-Asp-Ala-Gly-Leu-Val

• Molecular Formula: C₆₂H₉₈N₁₆O₂₂

• Molecular Weight: 1419.5 g/mol

• Purity: >99% (by HPLC)

• Form: Lyophilized white powder

• Packaging: 20mg peptide in sterile glass vial + 2ml bacteriostatic water (0.9% BA) in separate vial.

Testosterone Enanthate 250mg: A Comprehensive Review

Introduction:
Testosterone is a naturally occurring hormone in the human body that plays a crucial role in the development of male characteristics, such as muscle mass, bone density, and sexual function. Testosterone Enanthate is a synthetic derivative of testosterone, which is widely used in medical and athletic settings. This article aims to provide a detailed description of Testosterone Enanthate 250mg, its uses, benefits, side effects, and dosage guidelines.

What is Testosterone Enanthate 250mg?
Testosterone Enanthate 250mg is an injectable form of testosterone medication. It is available in the form of a clear, yellowish oil-based solution for intramuscular administration. The 250mg refers to the concentration of testosterone present in each milliliter of the solution. This particular dosage is one of the most commonly prescribed options for testosterone replacement therapy (TRT) and performance enhancement purposes.

Medical Uses:
Testosterone Enanthate 250mg is primarily prescribed for the treatment of conditions associated with low testosterone levels in men, such as hypogonadism. Hypogonadism is a medical condition characterized by inadequate testosterone production, leading to symptoms like fatigue, reduced libido, muscle loss, and depression. Testosterone Enanthate helps restore testosterone levels to within the normal range, alleviating these symptoms and improving overall well-being.

Performance Enhancement:
In addition to its medical uses, Testosterone Enanthate 250mg is widely used by athletes, bodybuilders, and fitness enthusiasts for performance enhancement purposes. It is classified as an anabolic steroid due to its ability to promote muscle growth, increase strength, and enhance athletic performance. Testosterone Enanthate is often included in bulking cycles to maximize muscle gains and improve recovery between intense workouts.

Benefits:
1. Increased Muscle Mass: Testosterone is an essential hormone for muscle growth. By using Testosterone Enanthate 250mg, individuals can experience significant gains in lean muscle mass due to enhanced protein synthesis and nitrogen retention.

2. Improved Strength: Higher testosterone levels result in increased strength and power, allowing individuals to lift heavier weights and perform better during intense training sessions.

3. Enhanced Recovery: Testosterone Enanthate promotes faster recovery from exercise-induced muscle damage, reducing the downtime between workouts and allowing for more frequent training sessions.

4. Increased Bone Density: Low testosterone levels are associated with decreased bone density and increased risk of osteoporosis. Testosterone Enanthate can help improve bone mineral density, reducing the risk of fractures and promoting overall bone health.

5. Enhanced Libido: Testosterone plays a crucial role in sexual function. Testosterone Enanthate can help improve libido, sexual performance, and overall sexual satisfaction in individuals with low testosterone levels.

Dosage and Administration:
The dosage of Testosterone Enanthate 250mg varies depending on the condition being treated and individual needs. For the treatment of hypogonadism, a typical starting dose is 50-400mg administered every 2-4 weeks. Athletes and bodybuilders using Testosterone Enanthate for performance enhancement often use higher doses ranging from 200-600mg per week, divided into two or more injections. However, it's essential to consult with a healthcare professional before initiating any testosterone therapy to ensure proper dosage and monitoring.

Side Effects:
While Testosterone Enanthate is generally well-tolerated when used as directed, it is not without potential side effects. Some common side effects include:

1. Estrogen-related Side Effects: Testosterone can convert to estrogen in the body, leading to side effects such as water retention, gynecomastia (development of breast tissue in males), and increased blood pressure.

2. Androgenic Side Effects: Testosterone Enanthate may cause androgenic side effects, including acne, oily skin, increased body and facial hair growth, and male pattern baldness in individuals predisposed to it.

3. Suppression of Natural Testosterone Production: Prolonged use of Testosterone Enanthate can suppress the body's natural testosterone production, leading to testicular atrophy and potential infertility.

4. Cardiovascular Risks: There is evidence suggesting that long-term use of testosterone may increase the risk of cardiovascular diseases, including heart attacks and strokes.

Conclusion:
Testosterone Enanthate 250mg is a widely used synthetic testosterone medication with both medical and performance-enhancing benefits. It helps individuals with low testosterone levels regain their vitality and improve their quality of life. For athletes and bodybuilders, Testosterone Enanthate can contribute to significant gains in muscle mass, strength, and overall athletic performance. However, it's crucial to use this medication responsibly and under the guidance of a healthcare professional to minimize the risk of side effects and ensure optimal results.

Introduction: Redefining High-Concentration Testosterone Therapy

For experienced athletes and bodybuilders seeking a potent, long-acting testosterone compound, the challenge has often been balancing efficacy with tolerability. High-concentration single-ester testosterones can lead to significant injection discomfort and volatile blood hormone levels. GENLABS, a leader in advanced performance formulations, addresses this fundamental issue with TEST 400 (Testosterone Tri-Blend). This isn't just another high-dose testosterone; it is a meticulously engineered synergy of three distinct testosterone esters designed to provide a rapid onset of action, sustained anabolic release, and improved injection comfort at a remarkable 400mg per milliliter concentration. Crafted for the discerning user, GENLABS TEST 400 represents the pinnacle of sustained anabolic drive, muscle protein synthesis, and performance enhancement.

Scientific Breakdown: The Tri-Ester Advantage

The proprietary power of GENLABS TEST 400 lies in its intelligent ester blend. Unlike single-ester products, this tri-blend strategically combines short, medium, and long-chain esters to create a unique pharmacokinetic profile.

• Testosterone Propionate (Short Ester): Acting as the "activator," propionate provides a rapid surge in testosterone levels within 24-48 hours post-injection. This quickly saturates androgen receptors, initiating nitrogen retention and glycogenolysis, leading to immediate increases in strength, muscle fullness, and recovery perception.

• Testosterone Phenylpropionate (Medium Ester): Bridging the gap, this ester takes effect within 2-3 days and maintains elevated levels for up to a week. It ensures a seamless transition from the initial propionate spike to the sustained release of the longer ester, preventing any dip in anabolic activity.

• Testosterone Decanoate (Long Ester): The "sustainer," decanoate has a half-life exceeding two weeks. It slowly releases testosterone, maintaining a powerful anabolic environment that promotes continuous muscle growth, strength gains, and elevated metabolic rate. This creates a stable hormonal plateau, minimizing peaks and troughs.

The Result: A sophisticated "front-loaded" release profile that ensures you feel the effects quickly without the frequent injection requirements of short esters alone, while benefiting from the prolonged, steady-state anabolism of a long ester. This synergy allows for less frequent dosing schedules (typically 1-2 times per week) while maintaining exceptionally stable blood levels, which can contribute to more consistent moods, energy, and gains with potentially reduced side effects related to hormone fluctuation.

Key Benefits & Expected Results

GENLABS TEST 400 is engineered for significant physio-anabolic transformations. When integrated into a structured cycle with appropriate diet and training, users can expect:

• Dramatic Increases in Lean Muscle Mass: The primary action of supraphysiological testosterone is a profound increase in muscle protein synthesis. Users experience rapid and substantial gains in lean, dense muscle tissue, moving beyond genetic plateaus.

• Unmatched Strength and Power Output: Androgen receptor saturation in muscle and neural tissue leads to immediate and continuous improvements in strength, lifting capacity, and gym performance, allowing for more intense, growth-inducing training sessions.

• Enhanced Recovery and Reduced Fatigue: Testosterone decreases muscle breakdown (catabolism) and improves red blood cell production, enhancing oxygenation. This results in dramatically shortened recovery times between sets and workouts, and a significant reduction in overall training-induced fatigue.

• Elevated Metabolic Rate and Fat Loss Support: As a powerful metabolic catalyst, TEST 400 increases basal metabolic rate (BMR), promoting the utilization of stored body fat for energy. This creates a recomposition effect, building muscle while stripping away fat for a harder, more defined physique.

• Sustained Anabolic Environment: The tri-blend technology ensures your body remains in a constant state of anabolism for the duration of the cycle, maximizing the efficiency of every training session and nutritional intake.

Advanced Formulation & Tolerability

A common drawback of high-concentration (400mg/mL+) single-ester products is significant injection site pain (pip) due to the high concentration of hormone and solvent required to keep it in solution. GENLABS overcomes this through its Tri-Blend technology.

By combining three esters with different solubility profiles, GENLABS can achieve the high total concentration of 400mg/mL using a more balanced and refined solvent blend. This advanced pharmaceutical compounding results in a solution that is notably smoother and better tolerated than comparable single-ester high-dose products, while maintaining absolute sterility and purity. Every vial is produced in a certified laboratory, undergoes rigorous filtration, and is batch-tested to ensure the highest standards of quality, potency, and safety.

Target User & Cycle Integration

GENLABS TEST 400 is a powerful compound intended for intermediate to advanced users with prior experience with testosterone compounds. Its high concentration and potent effects require a knowledgeable approach to cycle planning, ancillary drug use (such as Aromatase Inhibitors to manage estrogen conversion), and Post-Cycle Therapy (PCT).

• Typical Dosage: Due to its potency, dosing typically ranges from 400mg to 800mg per week, often split into two injections (e.g., Monday & Thursday) to maintain stable blood levels.

• Stacking Potential: TEST 400 serves as the perfect "base" for any bulking or strength cycle. It is commonly stacked with other compounds like Deca-Durabolin (for synergistic mass and joint relief) or powerful orals like Dianabol or Anadrol for an explosive kickstart. For cutting cycles, it pairs effectively with non-aromatizing agents like Trenbolone or Masteron.

• Crucial Considerations: Users must be prepared to manage estrogen-related side effects (water retention, gynecomastia) due to the high dose and aromatization of testosterone. Regular monitoring and having ancillaries on hand is non-negotiable. A comprehensive PCT with SERMs like Clomid and Nolvadex is essential to restore endogenous testosterone production post-cycle.

Why Choose GENLABS TEST 400?

In a market saturated with single-ester testosterones, GENLABS TEST 400 stands apart through intelligent design:

1. Superior Pharmacokinetics: The tri-ester blend offers the benefits of both short and long esters in one vial.

2. Enhanced Tolerability: A smoother injection experience compared to other 400mg/mL products.

3. Dosing Efficiency: Achieve stable, high-level anabolism with fewer injections per week.

4. GENLABS Quality Assurance: Manufactured under strict protocols for guaranteed purity, sterility, and accurate dosing.

5. Proven Results: The chosen ester ratio is time-tested in performance circles for delivering rapid and sustained mass and strength gains.

Conclusion: The Ultimate Testosterone Foundation

GENLABS TEST 400 (Testosterone Tri-Blend) 400mg/mL is more than a product; it is a strategic tool for substantial physical transformation. By solving the key problems of high-concentration esters—pain and unstable levels—it delivers a reliable, powerful, and consistent anabolic stimulus. For the athlete committed to pushing the boundaries of their physical potential, GENLABS TEST 400 provides the sustained hormonal foundation upon which monumental gains are built. It is the intelligent choice for those who demand advanced science, superior tolerability, and uncompromising results from their testosterone compound.

Disclaimer: This product is intended for research purposes only by qualified laboratory professionals. It is not for human or animal consumption. All information provided is for educational and informational purposes. Understand and comply with all applicable laws in your jurisdiction regarding the possession and use of performance-enhancing substances. Consult with a licensed healthcare professional before beginning any new nutritional or supplement regimen.

TRI TEST 400 is a popular anabolic steroid that is widely used by bodybuilders and athletes seeking to enhance their performance and gain muscle mass. It is a powerful blend of three different testosterone esters, namely Testosterone Enanthate, Testosterone Cypionate, and Testosterone Decanoate.

Each of these testosterone esters has its own unique release rate and half-life, which allows for a sustained and consistent release of testosterone into the body over an extended period. This combination of esters ensures that TRI TEST 400 provides both immediate and long-lasting effects.

Testosterone is the primary male sex hormone responsible for the development of male sexual characteristics, such as muscle growth, increased bone density, and increased red blood cell production. By supplementing with TRI TEST 400, users can experience a significant increase in testosterone levels, leading to enhanced muscle growth, strength gains, and improved athletic performance.

One of the advantages of TRI TEST 400 is its versatility. Due to the blend of different esters, it has a relatively fast onset of action and a longer duration of activity compared to single ester testosterone compounds. This means that users can inject TRI TEST 400 less frequently while still maintaining stable testosterone levels in their system.

However, it's important to note that TRI TEST 400 is a potent androgenic and anabolic steroid, and its use should be approached with caution. Like any other steroid, it carries potential side effects, including but not limited to acne, increased aggression, hair loss, oily skin, and suppression of natural testosterone production. It is highly recommended to consult with a healthcare professional or a knowledgeable expert before using TRI TEST 400.

Additionally, TRI TEST 400 is a controlled substance in many countries and is only available through a prescription. Its use without proper medical supervision or for non-medical purposes is considered illegal and may have legal consequences.

In conclusion, TRI TEST 400 is a blend of three different testosterone esters that is widely used by bodybuilders and athletes for its ability to enhance muscle growth, strength, and overall performance. However, its use should be approached responsibly and under the guidance of a healthcare professional to minimize potential side effects and ensure safety.

Advanced Aromatase Inhibition for Postmenopausal Athletes and Bodybuilders

In the pursuit of peak physical conditioning, advanced athletes understand that hormonal optimization is a critical component. For postmenopausal female athletes and dedicated male bodybuilders, managing estrogen levels is paramount to achieving hard, dry muscle, enhancing metabolic function, and supporting specific physique goals. LETROZOLE (Femara) 2.5mg by GenLabs represents the pinnacle of pharmaceutical-grade aromatase inhibition, offering unparalleled potency and precision in estrogen management. This 100-tablet formulation provides a reliable, consistent, and powerful tool for those who require serious endocrine support in their advanced supplementation protocol.

Understanding the Science: The Role of Aromatase and Estrogen

Estrogen, while essential for numerous physiological processes, can present significant challenges in performance and physique development. The enzyme aromatase is responsible for converting androgens (like testosterone) into estrogens. In scenarios where androgen levels are elevated—whether through natural hormonal cycles or external supplementation—aromatase activity can lead to disproportionate estrogen conversion.

Elevated estrogen can result in:

• Water retention and subcutaneous bloating, obscuring muscle definition.

• Increased adipose (fat) tissue storage, particularly in stubborn areas.

• Potential for gynecomastia in male users, the development of breast tissue.

• Negative feedback loops that can suppress natural gonadotropin and testosterone production.

LETROZOLE (Femara) 2.5mg is specifically engineered to address this at the source. It is a third-generation, non-steroidal, competitive aromatase inhibitor (AI). Its mechanism of action is both selective and potent: it binds reversibly to the heme group of the aromatase enzyme, creating a powerful blockade that drastically reduces the conversion of androstenedione and testosterone into estrone and estradiol. By suppressing serum estrogen levels by up to 95-98%, Letrozole creates a hormonal environment conducive to fat loss, muscle hardness, and the mitigation of estrogenic side effects.

GenLabs Quality: Pharmaceutical Precision You Can Trust

The efficacy of any active pharmaceutical ingredient is contingent upon the quality of its manufacture. GenLabs produces this Letrozole under strict cGMP (current Good Manufacturing Practices) conditions, ensuring:

• Exact Dosage: Each tablet delivers a precise 2.5mg of micronized Letrozole, the clinically established therapeutic dose.

• High Purity & Stability: Raw materials are sourced from certified suppliers and undergo rigorous analytical testing (HPLC, mass spectrometry) to verify identity, potency, and absence of contaminants.

• Optimal Bioavailability: The tablet formulation is designed for consistent dissolution and systemic absorption, guaranteeing predictable pharmacokinetics.

• Secure Packaging: The 100-tablet bottle includes a tamper-evident seal and desiccant to preserve integrity.

This commitment to quality means users can dose with confidence, knowing each tablet's potency is reliable and consistent.

Primary Applications and User Protocols

1. For the Postmenopausal Female Athlete:
Postmenopause brings a natural decline in both estrogen and progesterone. For the serious athlete, strategic use of an AI like Letrozole can help manage the estrogen-to-androgen ratio, potentially leading to:

• Enhanced fat loss and improved muscle-to-fat ratio.

• Increased metabolic rate and energy utilization.

• Support for lean tissue preservation during caloric deficits.

• A "dryer," more defined physique by minimizing estrogen-related water retention.
  Protocol Note: Due to its potency, female users must start with a highly conservative dosing strategy (e.g., 0.25mg - 0.5mg, or 1/5 to 1/4 of a tablet, once or twice per week) and adjust based on tolerance and physiological response. Consultation with a healthcare professional familiar with hormonal therapy is strongly advised.

2. For the Male Bodybuilder During Aromatizable Cycle Support:
This is the most common application for Letrozole. When using aromatizable androgens (e.g., Testosterone, Dianabol, Sustanon), it is employed as an on-cycle estrogen control agent.

• Preventative Low-Dose Approach: A minimal dose (e.g., 0.25mg to 0.5mg EOD or twice weekly) can effectively keep estrogen within a high-normal range, preventing the onset of side effects like water retention and gynecomastia without crashing estrogen levels.

• Therapeutic/Corrective Dose: If estrogenic side effects manifest, a short-term increase in dosage (e.g., 0.5mg - 1.0mg daily for 5-7 days) can rapidly mitigate symptoms before returning to a lower maintenance dose.

• Pre-Contest Sharpening: In the final weeks before a competition, bodybuilders may use Letrozole (typically 0.5mg ED or EOD) to achieve extreme dryness and muscle detail by eliminating residual estrogenic water.

3. As Part of Post-Cycle Therapy (PCT):
While not a Selective Estrogen Receptor Modulator (SERM) like Clomid or Nolvadex, Letrozole can play a crucial role in advanced PCT protocols. By powerfully suppressing estrogen, it removes the negative feedback on the hypothalamic-pituitary-testicular axis (HPTA). This can lead to a more robust surge in the production of LH (Luteinizing Hormone) and FSH (Follicle-Stimulating Hormone), thereby accelerating the recovery of endogenous testosterone production. It is often used in conjunction with SERMs for a comprehensive restart.

Critical Dosing Guidelines and Warnings

POTENCY WARNING: LETROZOLE IS EXTREMELY POTENT. MORE IS NOT BETTER.
Crashing estrogen levels (bringing them too low) can have severe negative consequences, including:

• Catabolic joint pain and dried connective tissues, increasing injury risk.

• Lethargy, depression, and cognitive fog.

• Drastically lowered HDL ("good") cholesterol and adversely affected lipid profiles.

• Loss of libido and sexual function.

Always start with the lowest possible dose (e.g., 0.25mg) and assess your body's response over 7-10 days. Blood work (estradiol sensitive LC/MS/MS assay) is the only definitive way to guide responsible dosing. Never use Letrozole without a clear understanding of your hormonal baseline and goals.

Specifications & Disclaimer

• Product Name: Letrozole (Generic Femara)

• Manufacturer: GenLabs

• Dosage: 2.5mg per tablet

• Quantity: 100 tablets

• Form: Oral Tablets

• Primary Compound: Letrozole

• Class: Non-Steroidal Aromatase Inhibitor (AI)

IMPORTANT DISCLAIMER:
This product is sold for research purposes only and as a reference material for licensed professionals. The information presented here is for educational and informational purposes concerning the biochemical properties of Letrozole. It is not a substitute for professional medical advice, diagnosis, or treatment. The use of prescription medications without a valid prescription from a licensed healthcare practitioner is potentially dangerous and illegal. Users assume all risks and liabilities associated with the possession or use of this compound. Always consult with a physician before beginning any new dietary, exercise, or supplementation regimen.

Take control of your endocrine environment with pharmaceutical precision. GenLabs Letrozole 2.5mg provides the powerful, reliable aromatase inhibition required for advanced physique and performance goals when used responsibly as part of a meticulously planned protocol.

Unlock Cellular Longevity: A Comprehensive Guide to GenLabs Epitalon 10mg with Bacteriostatic Water

Meta Title: GenLabs Epitalon 10mg | Premium Peptide for Telomere & Cellular Health | 99%+ Purity
Meta Description: Explore GenLabs' research-grade Epitalon 10mg vial with bacteriostatic water. Discover the science behind this peptide's role in telomere support, pineal gland function, and cellular rejuvenation. Ideal for licensed research. Third-party tested, >99% purity.

H1: EPITALON – 10MG VIAL (WITH BACTERIOSTATIC WATER) – GENLABS | Research Peptide for Telomere and Cellular Function

In the frontier of biogerontology and longevity research, few compounds have sparked as much scientific interest as Epitalon (also known as Epithalon or Epithalone). GenLabs is proud to offer a premium, research-grade formulation of this groundbreaking tetrapeptide: Epitalon 10mg, presented as a sterile lyophilized powder with a complimentary 2ml vial of Bacteriostatic Water (0.9% Benzyl Alcohol). This complete kit is designed for precision, stability, and convenience in a controlled laboratory setting, supporting serious inquiry into the mechanisms of cellular aging, telomere dynamics, and neuroendocrine regulation.

Understanding Epitalon: The Science of a Pioneering Tetrapeptide

Epitalon is a synthetic replicate of the natural pineal peptide Epithalamin, identified through decades of research into the pineal gland's role in aging. Its molecular structure is a simple yet powerful sequence of four amino acids: Alanine-Glutamate-Asparagine-Glycine (Ala-Glu-Asp-Gly). This design allows it to mimic the biological activity of the pineal gland's own signaling molecules, acting as a potent regulator of circadian rhythms and cellular life cycles.

The primary hypothesized mechanism of action, supported by various preclinical studies, centers on the activation of telomerase enzyme expression. Telomerase is responsible for maintaining and elongating telomeres—the protective nucleotide caps at the ends of chromosomes. Telomere shortening is a hallmark of cellular senescence; as cells divide, telomeres erode, eventually leading to cellular aging and dysfunction. By potentially upregulating telomerase, Epitalon is a subject of research for its role in promoting telomere integrity, thereby supporting cellular longevity and function.

Key Research Areas and Potential Biological Functions

GenLabs Epitalon is presented strictly for in vitro (cell culture) and animal model research conducted by qualified professionals in licensed laboratories. Published scientific literature suggests several key areas of investigation:

1. Telomere Maintenance and Cellular Senescence: Research focuses on Epitalon's potential to modulate telomerase activity in various cell lines, studying its effects on telomere length and the delay of replicative senescence.

2. Pineal Gland and Melatonin Regulation: As a pineal gland peptide analogue, Epitalon is studied for its influence on the synthesis and secretion of melatonin, a master regulator of circadian rhythms and antioxidant processes.

3. Antioxidant and Cytoprotective Effects: Studies investigate its role in mitigating oxidative stress in cellular models, potentially enhancing endogenous antioxidant defense systems.

4. Retinal and Visual Function: Some research explores its effects on photoreceptor cells and retinal pigment epithelium, relevant to age-related ocular conditions.

5. Neuroendocrine Homeostasis: Investigations examine its broad regulatory effects on the hypothalamic-pituitary axis, influencing the balance of key hormones that decline with age.

Why Choose GenLabs Epitalon 10mg?

1. Uncompromising Purity and Quality:
Every batch of GenLabs Epitalon is synthesized to exceed 99% purity, verified via High-Performance Liquid Chromatography (HPLC) and Mass Spectrometry (MS). We provide a Certificate of Analysis (CoA) for full transparency, confirming identity, purity, and absence of residual solvents or contaminants.

2. Complete, Researcher-Ready Kit:
Each order includes:

• One 10mg glass vial of sterile, lyophilized Epitalon peptide.

• One 2ml glass vial of USP-grade Bacteriostatic Water (0.9% Benzyl Alcohol).

• The bacteriostatic water is essential for creating a multi-dose, sterile solution that inhibits bacterial growth for extended in vitro use post-reconstitution.

3. Optimal Stability and Potency:
The lyophilized (freeze-dried) powder form ensures maximum long-term stability when stored at recommended temperatures (-20°C for long term, 2-8°C for daily use). The sealed vial protects the peptide from moisture and degradation.

4. Manufactured in a cGMP-Compliant Facility:
Our peptides are produced in ISO-certified laboratories adhering to current Good Manufacturing Practices (cGMP), ensuring batch-to-batch consistency and sterile production standards.

Detailed Product Specifications

• Peptide Name: Epitalon (Epithalon)

• Sequence: Ala-Glu-Asp-Gly

• Molecular Formula: C₁₄H₂₂N₄O₉

• Molecular Weight: 390.35 g/mol

• Purity: >99% (by HPLC)

• Form: Lyophilized white powder

• Vial Contents: 10mg peptide per vial

• Included Solvent: 2ml Bacteriostatic Water (0.9% Benzyl Alcohol)

• Storage (Lyophilized): Store at -20°C or below. Keep desiccated and protected from light.

• Storage (Reconstituted Solution): For research purposes, once reconstituted with bacteriostatic water, the solution should be stored at 2-8°C and used within a timeframe appropriate for sterile in vitro protocols (typically up to 21 days).

Reconstitution Guidelines for Research Use

Important: The following is a general guideline. Specific reconstitution protocols must be determined by the researcher based on experimental design.

1. Aseptic Technique: Perform all steps in a sterile laminar flow hood using sterilized equipment.

2. Gently Solubilize: Slowly inject the bacteriostatic water from the provided vial down the side of the peptide vial to avoid aggressive agitation.

3. Swirl Gently: Roll the vial between your hands or swirl gently until the lyophilized powder is completely dissolved. DO NOT SHAKE VIGOROUSLY, as this can cause peptide denaturation (chain breaking).

4. Calculation: A 10mg vial reconstituted with 2ml of bacteriostatic water yields a solution concentration of 5mg/ml (or 5000mcg/ml).

5. Aliquot (Recommended): For optimal stability, researchers may choose to aliquot the reconstituted solution into smaller, sterile vials to minimize freeze-thaw cycles.

Disclaimer and Intended Use

GENLABS EPITALON 10MG IS SOLD STRICTLY FOR LABORATORY RESEARCH PURPOSES ONLY. It is not for human or veterinary use, not for ingestion, injection, or diagnostic use. This product is a chemical reagent for in vitro and animal model studies conducted by qualified, licensed professionals in controlled research environments. It is the sole responsibility of the purchaser to ensure compliance with all local, state, federal, and institutional regulations regarding the acquisition, handling, and use of research peptides.

By purchasing this product, you acknowledge and certify that you are a licensed researcher or institution engaged in lawful scientific investigation.

Commitment to Research Excellence

At GenLabs, we bridge the gap between cutting-edge peptide science and the research community. Our Epitalon 10mg kit embodies our commitment to providing scientists with the highest quality tools to explore the fundamental biology of aging. We support rigorous, ethical research aimed at expanding human knowledge of cellular health and longevity.

Order GenLabs Epitalon 10mg today and equip your laboratory with a premier research tool for pioneering studies in biogerontology and cellular mechanics.

FRAG-176 5MG VIAL (with Bacteriostatic Water) – GENLABS: The Definitive Guide to Advanced Metabolic Enhancement

Product Name: FRAG-176 5mg Vial (with Bacteriostatic Water)
Brand: GENLABS
Active Ingredient: Fragment 176-191 (FRAG-176), a modified, selective segment of Human Growth Hormone (HGH).
Presentation: Sterile lyophilized powder in a 5mg vial, accompanied by a separate 2ml vial of Bacteriostatic Water for reconstitution.
Primary Applications: Targeted fat metabolism, stubborn adipose tissue reduction, metabolic optimization, and body recomposition.

Introducing FRAG-176 by GENLABS: Precision Science for Targeted Fat Loss

In the pursuit of optimal body composition, the challenge has never been merely about weight loss—it’s about the precise, targeted reduction of stubborn adipose tissue that resists diet and exercise. GENLABS rises to this challenge with FRAG-176, a pinnacle of peptide science designed for researchers and enthusiasts seeking a sophisticated approach to metabolic enhancement. Unlike broad-spectrum compounds, FRAG-176 represents a paradigm shift: a selective, fragment-based therapy that harnesses the fat-mobilizing power of Growth Hormone without its systemic proliferative effects.

Our FRAG-176 5mg Vial, complete with convenient Bacteriostatic Water, embodies the GENLABS commitment to purity, precision, and research excellence. This product is meticulously synthesized in state-of-the-art cGMP-certified facilities, undergoes rigorous third-party HPLC/MS analysis for verification of >99% purity, and is presented in sterile, lyophilized form to ensure stability and potency. It is crafted for the discerning individual who demands nothing less than laboratory-grade quality for their investigative work in metabolic function and adipose tissue biology.

Understanding the Molecule: What is FRAG-176?

FRAG-176, also known as AOD-9604 (Anti-Obesity Drug 9604), is a synthetic peptide fragment comprising the 176-191 amino acid sequence of the Human Growth Hormone (HGH) beta chain. This region has been identified in scientific literature as the "lipolytic region" – the key segment responsible for HGH's ability to stimulate fat breakdown (lipolysis) and inhibit fat storage (lipogenesis).

The genius of FRAG-176 lies in its modification and selectivity. While full-sequence HGH influences growth in bones, organs, and muscles via IGF-1 mediation, the FRAG-176 fragment has been specifically engineered to disconnect fat-burning from growth promotion. It operates through a direct, receptor-mediated mechanism on adipose (fat) cells, making it a highly targeted agent for metabolic research. It does not significantly impact blood sugar (insulin resistance) or promote growth in non-adipose tissues, a significant distinction from its parent molecule.

Key Research Applications and Potential Benefits

GENLABS FRAG-176 is intended for in vitro and research applications to study the following areas:

1. Targeted Lipolysis: The primary research focus is on the peptide's ability to selectively stimulate the breakdown of stored triglycerides in adipocytes (fat cells), particularly within stubborn fat deposits such as the abdomen, waist, and thighs.

2. Inhibition of Lipogenesis: Research indicates FRAG-176 may help suppress the conversion of excess carbohydrates into stored fat, studying its role in regulating the body's fat-storage pathways.

3. Metabolic Rate Enhancement: Investigations explore how FRAG-176 can influence the basal metabolic rate (BMR), potentially increasing the body's innate caloric expenditure, even at rest.

4. Improved Body Composition & Recomposition: A core area of study is its potential to alter the fat-to-lean mass ratio, supporting research into protocols aimed at reducing adipose tissue while preserving lean muscle mass—a critical goal in body recomposition.

5. Appetite Modulation: Preliminary studies suggest a potential role in influencing hormones related to satiety and hunger, such as leptin, making it a compound of interest for research into metabolic signaling pathways.

Why Choose GENLABS FRAG-176? Our Commitment to Excellence

• >99% HPLC/MS Verified Purity: Every batch is independently analyzed, with certificates of analysis (CoA) available, confirming the absence of impurities and accurate peptide content.

• cGMP Synthesis: Manufactured under strict Current Good Manufacturing Practices, ensuring the highest standards of production, sterility, and consistency.

• Lyophilized for Maximum Stability: The freeze-dried powder format guarantees long-term stability and potency until the moment of reconstitution.

• Supplied with Bacteriostatic Water: We include a sterile 2ml vial of Bacteriostatic Water (0.9% Benzyl Alcohol), simplifying the preparation process and ensuring multi-dose usability post-reconstitution for 28 days.

• Research-Focused Formulation: Designed explicitly for laboratory use, our product is free from unnecessary additives, providing researchers with the pure compound for their studies.

• Vacuum-Sealed Vials: Each vial is sealed under vacuum, a key indicator of proper manufacturing and sterility. You will hear the distinct "hiss" upon puncturing the rubber stopper.

Laboratory Handling and Preparation Guide

Materials Provided: 1 x 5mg FRAG-176 lyophilized vial, 1 x 2ml Bacteriostatic Water vial.
Materials Required (Not Included): Sterile alcohol wipes, sterile insulin syringes (1ml or 0.5ml, measured in IU), appropriate sharps disposal container.

Reconstitution Protocol:

1. Sanitize: Clean the rubber stoppers of both vials thoroughly with an alcohol wipe.

2. Draw Bacteriostatic Water: Draw 1-2ml of the supplied Bacteriostatic Water into a sterile syringe. (1ml is standard for a concentration of 5mg/ml).

3. Reconstitute: Gently inject the water into the FRAG-176 vial, aiming the stream against the glass wall to avoid aggressive agitation of the peptide. Swirl the vial gently until the powder is fully dissolved into a clear liquid. Do not shake.

4. Storage: Once reconstituted, the solution must be stored refrigerated at 2°C to 8°C (36°F to 46°F) and used within 28 days due to the preservative in the Bacteriostatic Water. Unreconstituted vials should be stored in a cool, dark place.

Important Research Considerations:

• Sterility is Paramount: All handling must be performed in a clean, aseptic manner to prevent microbial contamination.

• Dosage is Research-Dependent: Concentration and dosing volume are determined by specific research design parameters. Common research protocols often investigate doses in the range of 250-500mcg per day.

• Site of Study: Research often involves subcutaneous administration models for study.

• Consult Literature: Researchers are advised to base their protocols on existing, published scientific literature on Fragment 176-191.

Frequently Asked Questions (FAQ)

Q: Is FRAG-176 the same as HGH?
A: No. FRAG-176 is a fragment of the HGH molecule. It mimics the fat-burning actions of HGH but has been shown in studies to lack its growth-promoting and potentially insulin-disrupting effects.

Q: How long does a 5mg vial last in a research setting?
A: This depends entirely on the experimental protocol. For example, a daily research dose of 500mcg would utilize one 5mg vial over approximately 10 study days.

Q: Why is Bacteriostatic Water included?
A: Bacteriostatic Water contains 0.9% Benzyl Alcohol, which inhibits bacterial growth. This allows the reconstituted solution to be used safely in a multi-dose model for up to 28 days when refrigerated, which is essential for research efficiency.

Q: What are the expected research outcomes?
A: Research focuses on outcomes related to enhanced lipolytic activity, reduced adipocyte size, changes in metabolic rate markers, and alterations in body composition metrics. Results are protocol and subject-dependent.

Q: Is this product for human consumption?
A: No. GENLABS FRAG-176 is sold strictly for laboratory research purposes only. It is not a drug, dietary supplement, or intended for diagnostic or therapeutic use. It is not for human or animal consumption. This product is to be used only by qualified researchers in controlled laboratory settings.

Conclusion: Elevate Your Metabolic Research with GENLABS

For the serious researcher investigating the frontiers of metabolic science and targeted lipolysis, GENLABS FRAG-176 offers an unmatched tool. It combines cutting-edge peptide technology with an unwavering commitment to quality and purity. By focusing on the precise mechanism of action within adipose tissue, FRAG-176 opens a window into sophisticated body recomposition strategies.

Choose GENLABS FRAG-176 5mg Vial—where exceptional quality meets pioneering science. Explore the potential of targeted metabolic enhancement with a compound built on a foundation of verified purity and research-grade excellence.

Disclaimer: This information is for educational and research purposes only. This product is a chemical for laboratory research and is not intended for human or veterinary diagnostic or therapeutic use. The researcher assumes all liability for the safe handling, storage, and use of this product in compliance with all applicable local, state, and federal regulations.